Overview OPC UA Specifications

General information:

EUROMAP started its work for developing OPC UA models for plastics and rubber machines as pure EUROMAP recommendation. In this context EUROMAP 83, 77 and 82.1 are already released. In the meantime, EUROMAP and OPC Foundation have established a joint working group. As consequence, all future publication will be published as both EUROMAP recommendations and OPC Companion Specifications. The latter are the neutral base versions for international adoptions.

Basis for all OPC UA specification for plastics and rubber machinery is EUROMAP 83. This defines general types which are used in the specific models.

Released specifications:

• EUROMAP 83: OPC UA interfaces for plastics and rubber machinery – General Type definitions
  Release 1.03 published on 1 June 2021
  EUROMAP 83 (Release1.03) is identical with OPC 40083 (Release 1.03)
• EUROMAP 77: OPC UA interfaces for plastics and rubber machinery – Data exchange between injection moulding machines and MES
  Release 1.01 published on 1 June 2020
  EUROMAP 77 (Release 1.01) is identical with OPC 40077 (Release 1.01)
• EUROMAP 82.1: Temperature control devices
  Release 1.01 published on 1 June 2020
  EUROMAP 82.1 (Release 1.01) is identical with OPC 40082-1 (Release 1.01)
• EUROMAP 82.2: Hot runner devices
  Release 1.00 published on 1 June 2021
  EUROMAP 82.2 (Release 1.00) is identical with OPC 40082-2 (Release 1.00)
• EUROMAP 82.3: LSR dosing systems
  Release 1.00.1 published on 21 June 2021
  EUROMAP 82.3 (Release 1.00.1) is identical with OPC 40082-3 (Release 1.00.1)
• EUROMAP 84 series
  Release of 12 parts describing extrusion lines and their components
  EUROMAP 84 series is identical with OPC 40084 series
   

Release Candidate:

• EUROMAP 79: Interface between Injection Moulding Machine and Handling Device / Robot
  Release Candidate 1.00.00 published on 8 November 2021
  EUROMAP 79 (Release Candidate 1.00.00) is identical with OPC 40079 (Release Candiadate 1.00.00)
• EUROMAP 86: Material Supply Systems
  Release Candidate of part 1 1.00.01 published on 19 October 2022
  EUROMAP 86.1 (Release Candidate 1.00.01) is identical with OPC 40086-1 (Release Candiadate 1.00.01)

Projects under development:

• EUROMAP 82.4: Dosing Systems
• EUROMAP 82.5: Moulds
• EUROMAP 84.13: Inline Measurement Systems
• EUROMAP 86: Material supply systems
• EUROMAP 87: Particle Foam Machines
• EUROMAP 89: Dryer
• EUROMAP 91: Winders